On a
green wall...
BEFORE
auto wall correction
AFTER
auto wall correction
Built-in wall color correction presets
These provide for adaptive color tone correction to display properly on non-white surfaces.
2500-hour filter life
NEC is committed to designing its products to provide
long lifecycles. This commitment even extends to
components within its products, including the improved
lter. This virtually maintenance-free
lter reduces the frequency at which
cleaning is required, thereby decreasing
your total cost of ownership. Filter
replacement is only required at the
time the lamp is replaced.
DESIGNED WITH THE ENVIRONMENT IN MIND
• Extended lamp life with ECO Mode™ technology increases lamp life up to 2500 hours, while lowering power consumption
• Power management enables projector to automatically turn off when an incoming signal is not detected from any of the inputs
• Auto Power On via the RGB (15-pin) input connector when a signal is detected from a computer
• Carbon savings meter calculates the positive effects of operating the projector in ECO Mode, which is encouraged by an optional
message at startup. A green ECO Mode button on the remote control makes the switch easy.
• Quick start (3 to 4 seconds) lets you begin presenting in seconds while quick shutdown (immediate power off with no cooling
required after shutdown) ensures efficient energy usage
• Sleep timer can be set to automatically turn off the projector at set countdown times
• Low power consumption (0.2W in stand-by mode) minimizes energy costs
• Direct power off provides instantaneous shutdown of the projector
Built-in stacking correction
The industry’s rst built-in stacking correction capabilities (up to four projectors) allows
the projectors to boost an image’s brightness up to 32,000 lumens, which is ideal
for larger-sized screens and environments with heavy ambient light. This feature also
prevents the complete loss of an image, which can happen when using only one projector.
PIP/Side-by-Side
This function allows two sources to
be displayed on the screen at one
time in either a picture-in-picture or
side-by-side conguration.
Edge blending
This function seamlessly blends
multiple projected images to display
a single high-resolution image.
Dual lamps
The PX Series features dual lamps,
providing up to 8000 lumens of
light output. You can combine
dual lamps for up to four dierent
light congurations (Normal Mode
with dual or single lamp and ECO
Mode with dual or single lamp) and
settings depending on the ambient
lighting conditions.
BUILT-IN SOFTWARE
To Next Page
Loading...
Need help?
General
