NEC NP1250 - Connecting an External Monitor

16
AUDIO
IN
WIRELESS
USB(LAN)
WIRELESS
AUDIO OUT
PHONE
MONITOR OUT
COMPUTER 1 IN (or COMPUTER 2 IN / COMPONENT IN)
2. Installation and Connections
Connecting an External Monitor
You can connect a separate, external monitor to your projector to simultaneously view on a monitor the RGB ana-
log or component image you’re projecting.
NOTE:
• Daisy chain connection is not possible.
• The MONITOR OUT connector will output no video signal (Digital signal) from the COMPUTER 3 (DVI-D) IN connector.
• When audio equipment is connected, the projector speaker is disabled.
• When the projector is in standby condition, the MONITOR OUT connector outputs the last displayed video signal and the AU-
DIO OUT jack outputs the last audio signal. The sound level remains at the previous level set for the last input used.
VGA signal cable (supplied)
Audio cable (not supplied)
Audio cable (not supplied)
VGA signal cable (not supplied)