NEC P474W - Page 84

73
5. Using On-Screen Menu
Selecting Signal Format [SIGNAL SELECT]
[COMPUTER]
Allowsyoutochoose[COMPUTER]foranRGBsourcesuchasacomputer,or[COMPONENT]foracomponent
videosourcesuchasaDVDplayer.Normallyselect[RGB/COMPONENT]andtheprojectorautomaticallydetectsa
componentsignal.Howevertheremaybesomecomponentsignalsthattheprojectorisunabletodetect.Ifthisis
thecase,select[COMPONENT].
[VIDEO]
This feature enables you to select composite video standards automatically or manually.
Factorydefaultsettingis[AUTO]andtheprojectorwillautomaticallydetectthevideostandard.
Inthecasewheretheprojectorhasdifcultydetectingthevideostandard,selecttheappropriatevideostandard
from the menu.
EnablingorDisablingWXGAMode[WXGAMODE]
Selecting[ON]willgiveprioritytoWXGA(1280×768)/WUXGA(1920×1200)signalsinrecognizinganinputsignal.
When[WXGAMODE]issetto[ON],XGA(1024×768)/UXGA(1600×1200)signalsmaynotberecognizedonP604X/
P603X.Inthiscase,select[OFF].
NOTE:
• [OFF]isselectedatthetimeofshipmentofP604X/P603X.
• [ON]isselectedatthetimeofshipmentofP554U/P474U/P554W/P474W.
Enabling the deinterlace [DEINTERLACE]
Turnsonoroffthedeinterlacefunctionforatelecinesignal.
OFF �������������������������� Select this option if there is any jitter or artifacts in video�
ON ���������������������������Default standard setting�
NOTE:ThisfeatureisnotavailableforHDTV(progressive)andcomputersignals.
Setting HDMI1, HDMI2, and HDBaseT [HDMI SETTINGS]
(HDBaseTisnotsupportedbyP603X)
MakethesettingsforeachvideolevelwhenconnectingHDMI1equipmentsuchasaDVDplayerandHDBaseTterminal.
VIDEO LEVEL ������������Select [AUTO] to automatically detect video level� If automatic detection may not work well, select [NORMAL] to
disable the [ENHANCED] feature of your HDMI equipment or select [ENHANCED] to improve image contrast and
increase detail in the dark areas�
Setting Audio [AUDIO SELECT]
MakethesettingsforeachaudiolevelwhenconnectingHDMIequipmentandHDBaseTport.Selectbetweeneach
equipmentandcomputer.
HDMI1, HDMI2 �������������� Select [HDMI1] or [HDMI2] to switch the HDMI1 IN or HDMI 2 IN digital audio signal or select [COMPUTER] to switch
the COMPUTER input audio signal�
HDBaseT ������������������ Select [HDBaseT] or [COMPUTER] to switch the source connected to the network�
(not supported by P603X)