NEC P502HL-2 - Page 29

29
7. NETWORK SETTINGS
9. After completing required settings, focus on [OK] and press the ENTER button.
Back to the [SECURITY] page.
10. Focus on [OK] and press the ENTER button.
Thiswillcompletesetting[PEAP-MSCHAPV2]for[EAPTYPE]in[WPA2-EAP].
TIP:
Clearing the digital certificate that is installed on the projector
To clear the digital certificate installed on the projector, follow the steps below.
By doing the following procedure, all the digital certificates for the currently displayed profile will be cleared.
1. Focus on [CLEAR CERTIFICATES] in the bottom left of the [ADVANCED] setting screen and press the
ENTER button.
A message for confirmation will be displayed.
2. Focus on [YES] and press the ENTER button.
The digital certificates will be cleared.