NEC P502HL-2 - Page 34

34
8. TOOLS
Activating the program timer
1. Focus on [ENABLE] at the top of the [PROGRAM TIMER] screen and press the ENTER button.
The check mark is added to the program list.
NOTE:
• Theprogramwillnotbeexecutedwithoutaddingacheckmark“√”toENABLEfortheprogramtimerevenwhenacheckmarkis
added for the program list.
• Evenacheckmarkisaddedfortheeffectivesettingof[PROGRAMTIMER],the[PROGRAMTIMER]willnotworkuntilthe[PRO-
GRAM TIMER] screen is not closed.
Changing the programmed settings
1. On the [PROGRAM LIST] screen, focus on a program you want to edit and press the ENTER button.
2. Change the settings on the [EDIT] screen.
3. Focus on [OK] and press the ENTER button.
The programmed settings will be changed.
You will be returned to the [PROGRAM LIST] screen.
Changing the order of programs
When set time is come, the program will be executed in order of program list number (smaller first)
1. On the [PROGRAM LIST] screen, focus on a program you want to change and press the ▶ button.
2. Press the ▼ button to select ↑ or ↓.
3. Press the ENTER button a few times to select a row to which you wish to move the program.
The order of the programs will be changed.
Deleting the programs
1. On the [PROGRAM LIST] screen, focus on a program number you want to delete and press the ▶ button.
2. Press the ▼ button to focus on [DELETE].
The confirmation screen will be displayed.
3. Focus on [DELETE] and press the ENTER button.
The program will be deleted.
This will complete deleting the program.