NEC P502WL-2 - Page 17

17
6. WEB SERVER
3. Move the focus to the box under the WEB SHARING in the APPS MENU.
4. Press ENTER button on the remote control.
Display the WEB SHARING options setting screen.
Item Explanation Remark
WEB CAPTURE Select USE/NOT USE capture from
the WEB browser. By setting this ON,
the projector screen will be displayed
onto the browser screen every 5
seconds.
Factory default setting is NOT USE
ACCESSPASSWORD Select whether to USE/NOT USE
the password for accessing the WEB
SHARING.
Factory default setting is NOT USE
DELETESHAREDFILES Deleteallsharedles
5. After setting up options, move the focus to OK and press the ENTER button.
If USE is selected both for WEB CAPTURE and ACCESS PASSWORD, the screen in below will displayed on. The
access password will be changed every time the password is reset or the projector is powered ON and OFF.
Starting the WEB SHARING
1. Start up the web browser on the computer and access the WEB SERVER.
• Pleaserefer"HowtoaccesstheWEBSERVER"onthepreviouspage
2. Input four digits number displayed on the APPS MENU and then click LOGIN.
• IfNOTUSEisselectedfortheaccesspasswordatthestep[5],theWEBSHARINGscreenwillbedisplayed.
• TheprojectorscreenwillbeswitchedtothePROJECTORCONTROLscreenonceyouclickthePROJECTOR
CONTROL tab, same as it, the projector screen will be switched to the MultiPresenter screen once you click the
MultiPresenter tab.