NEC P502WL-2 - Page 23

23
7. NETWORK SETTINGS
Advanced settings (INTELLIGENT CONNECTION)
Item Description Remarks
Security setting Select the security type (WPA2-PSK).
• Byfactorydefault,thisisset
to[Disable].
• WPA2-PSKkey:8to63alpha-
numeric letters characters.
LANmode Select the wireless mode. • Byfactorydefault,thisisset
to“IEEE802.11b/g/n”.
Channel Select the wireless channel. • Byfactorydefault,thisisset
to [6].
Advanced settings (simple access point)
Item Description Remarks
WPS settings Select the WPS push button method.
• Disable:DisabletheWPSfunction.
• Pushbutton:SelecttheWPSpushbuttonmethod.WPS
push button will be displayed in the application menu.
Security setting Select the security type (WPA2-PSK).
• The default factory setting
whenshippedis“Disable”.
• TheWPA2-PSKkeyconsists
of 8 - 63 half-byte alphanu-
meric characters.
SSID
SettheSSID. This consists of 1 - 32 half-byte
alphanumeric characters. The
default factory setting is the
manufacturing number of this
device.
LANmode Choose the wireless mode. The default factory setting when
shippedis“IEEE802.11b/g/n”.
Channel Choose the wireless channel. The default factory setting when
shippedis“6”.
Connection method with the push button method
1. Press the WPS push button under the application menu of the projector (AP).
A countdown of the WPS appears in the application menu.
2. Press the WPS push button on the WPS supported wireless terminal (Client side) during the countdown.
The WPS supported wireless terminal (Client side) will connect to the projector (AP).
Advanced Settings (Wi-Fi Direct)
Item Description Remarks
WPS settings Select the WPS push button method.
• Autopushbutton:Enabletoomittheproceduresearching
theterminalwhenreceivingconnectionrequestfromthe
Wi-FiDirectsupportedwirelessterminal.
• Push button: Perform the procedure for accepting the
connectionrequestreplyfromtheWi-FiDirectsupported
wireless terminal.
The default factory setting when
shippedis“AutoPushButton”.