NEC PA500U - To Remove The Wireless Lan Unit

153
6. Installation and Connections
To remove the wireless LAN unit
1. Remove the filter unit following steps 1 to 3 above.
2. RemovethewirelessLANunit.
If the wireless LAN unit is hard to remove, place a cloth, etc., over needle-
nose pliers to grasp the wireless LAN unit and pull it out.
NOTE:DonotgraspthewirelessLANunitwithexcessiveforce.Doingsowilldamage
it.
3. Mount the filter unit and filter cover as described in steps 5 and 6
above.
WIRELESS
WIRELESS