NEC PA653U - Page 100

86
5. Using On-Screen Menu
Entering the currently projected signal into the Entry List [ (STORE)]
1. Press the ▲ or ▼ button to select any number.
2. Press the ◀ or ▶buttontoselect[ (STORE)]andpresstheENTERbutton.
Calling up a signal from the Entry List [ (LOAD)]
Press the ▲ or ▼buttontoselectasignalandpresstheENTERbutton.
Editing a signal from the Entry List [ (EDIT)]
1. Press the ▲ or ▼buttontoselectasignalyouwishtoedit.
2. Press the ◀, ▶, ▲, or ▼buttontoselect[ (EDIT)]andpresstheENTERbutton.
The Edit window will be displayed.
SOURCENAME Enterasignalname.Upto18alphanumericcharacterscanbeused.
INPUT The input terminal can be changed. Switching between HDMI/DisplayPort/Computer/
HDBaseTispossible.
LOCK
Setsothattheselectedsignalcannotbedeletedwhen[ (ALLDELETE)]isexecuted.
ThechangesmadeafterLOCKexecutioncannotbesaved.
SKIP
Setsothattheselectedsignalwillbeskippedduringautosearch.
3. Settheaboveitemsandselect[OK]andpresstheENTERbutton.
NOTE: The input terminal cannot be changed to the currently projected signal.