NEC PA653U - Returning To Factory Default [Reset]

134
5. Using On-Screen Menu
Returning to Factory Default [RESET]
TheRESETfeatureallowsyoutochangeadjustmentsandsettingstothefactorypresetfora(all)source(s)except
thefollowing:
[CURRENT SIGNAL]
Resetstheadjustmentsforthecurrentsignaltothefactorypresetlevels.
Theitemsthatcanberesetare:[PRESET],[CONTRAST],[BRIGHTNESS],[COLOR],[HUE],[SHARPNESS],[AS-
PECTRATIO],[HORIZONTAL],[VERTICAL],[CLOCK],[PHASE],and[OVERSCAN].
[ALL DATA]
Resetalltheadjustmentsandsettingsforallthesignalstothefactorypreset.
All items can be reset EXCEPT [ENTRY LIST], [LANGUAGE], [BACKGROUND], [FILTER MESSAGE], [EDGE
BLENDING], [MULTI SCREEN], [SCREEN TYPE], [GEOMETRIC CORRECTION], [REF. WHITE BALANCE],
[STATICCONVERGENCE],[ADMINISTRATORMODE],[CONTROLPANELLOCK],[SECURITY],[COMMUNICA-
TIONSPEED],[DATEANDTIMESETTINGS],[CONTROLID],[STANDBYMODE],[FANMODE],[EDIDVERSION],
[HDCPVERSION],[LAMPLIFEREMAINING],[LAMPHOURSUSED],[FILTERHOURSUSED],[TOTALCARBON
SAVINGS],[WIREDLAN].
Toresetthelampusagetime,see“ClearingLampHourMeter[CLEARLAMPHOURS]”below.
[ALLDATA(INCLUDINGENTRYLIST)]
Resetalltheadjustmentsandsettingsforallthesignalsincludingthe[ENTRYLIST]tothefactorypresetexcept
[LANGUAGE],[BACKGROUND],[FILTERMESSAGE],[EDGEBLENDING],[MULTISCREEN],[SCREENTYPE],
[GEOMETRICCORRECTION],[REF.WHITEBALANCE],[STATICCONVERGENCE],[ADMINISTRATORMODE],
[CONTROLPANELLOCK],[SECURITY],[COMMUNICATIONSPEED],[DATEANDTIMESETTINGS],[CONTROL
ID], [STANDBYMODE], [FAN MODE], [EDID VERSION], [HDCP VERSION], [LAMP LIFE REMAINING], [LAMP
HOURSUSED],[FILTERHOURSUSED],[TOTALCARBONSAVINGS],[WIREDLAN].
Alsodeletesallthesignalsinthe[ENTRYLIST]andreturnstothefactorypreset.
NOTE:LockedsignalsinEntryListcannotbereset.
Clearing Lamp Hour Meter [CLEAR LAMP HOURS]
Resetsthelamp clockbacktozero.Selectingthisoptiondisplayssubmenufora conrmation.Select[YES]and
presstheENTERbutton.
NOTE:
• Elapsedtimeofthelampusewillnotbeaffectedevenwhen[RESET]isdonefromthemenu.
• Performing[CLEARLAMPHOURS]willreturnthe[REF.LIGHT]in[LIGHTMODE]toitsdefaultadjustments.Whentheprojector
isusedformulti-screenprojection,use[REF.LIGHT]toadjustthebrightnessagain.