NEC PA653U - Switching The Main Display With The Sub-Display And Vice Versa

68
4. Multi-Screen Projection
Switching the main display with the sub-display and vice versa
1. PresstheMENUbuttontodisplaytheon-screenmenuandselect[DISPLAY]→[PIP/PICTUREBYPICTURE].
This displays the [PIP/PICTURE BY PICTURE] screen in the on-screen menu.
2. Select[PICTURESWAP]usingthe▼/▲buttonsandthenpresstheENTERbutton.
Display the screen for switching the display positions.
3. Select[ON]usingthe▼buttonandthenpresstheENTERbutton.
The video of the main display will switch with that of the sub-display.
When turned “OFF” When turned “ON”
Sub-display video
Main display video Sub-display video
Main display video
The signal output from the HDBaseT OUT/Ethernet terminal does not change even if the display positions are
switched.
4. Press the menu button.
The on-screen menu will disappear.