NEC PA653U - Page 124

110
5. Using On-Screen Menu
Conditions for using tiling
• Alltheprojectorsneedtofullthefollowingconditions.
• Thepanelsizemustbethesame
• Theprojectionscreensizemustbethesame
• Theleftandrightendsortopandbottomendsoftheprojectionscreenmustbeconsistent.
• Thesettingsfortheleftandrightedgesoftheedgeblendingarethesame
• Thesettingsforthetopandbottomedgesoftheedgeblendingarethesame
 Ifthetilingconditionsaresatised,thevideoscreenoftheprojectorateachinstallationpositionwillbeautomati-
callyextractedandprojected.
 Ifthetilingconditionsarenotsatised,adjustthevideoscreenoftheprojectorateachinstallationpositionusing
thezoomfunction.
• AssignauniquecontrolIDtoeachprojector.
• Setthe“Colorsetting”and“DeepColorsetting”onyourBlu-rayplayerorcomputerto“Auto”.Refertotheowner's
manualaccompaniedwithyourBlu-rayplayerorcomputerformoreinformation.ConnectanHDMIoutputsignal
ofyourBlu-rayplayerorcomputertotherstprojectorandthenconnecttotheHDBaseTOUT/Ethernetporton
therstprojectortotheHDBaseTIN/Ethernetportonthesecondprojector,sametothesequelprojectors..
Tilingsettingexample)Numberofhorizontalunits=2,Numberofverticalunits=2
Horizontal order = Second unit
Vertical order = First unit