NEC SL1000 - Telephone Ring Style

SL1000 Getting Started Guide
34
Telephone Ring Style
You may want to change this setting if:
 You want to change the ringing style of outside and internal calls to telephones.
System Operation:
The ringing patterns are set for the system by Program 20-15-01
The default setting is:
Outside calls have a single ring pattern of 1 second on / 2 seconds off.
Internal calls have a double ring pattern of 0.4 seconds on / 0.2 seconds off / 0.4 seconds on / 2 seconds off.
Operation Display shows;
 Program20-15-01
Sets the ring pattern for outside calls
Outside Call Ring Pattern
1. After Log-In to the Programming Mode.
If you already Log-In the programming mode, skip this operation.
2. Dial 20 15 01. Change the ring pattern(1-13) for outside calls, if
require.
No. Ring Cycle
1 On
2 On:2.0 / Off:4.0
3 On:1.0 / Off:2.0
4 On:0.5 / Off:0.5
5 On:0.25 / Off:0.25
6 On:0.5 / Off:0.5 / On:0.5 / Off:1.5
7 On:0.25 / Off:0.25 / On:0.25 / Off:5.25
8 On:0.375 / Off:0.25 / On:0.375 / Off:2.0
9 On:0.25 / Off:0.125 / On:0.25 / Off:0.125 / On:0.25 / Off:2.0
10 On:1.0 / Off:4.0
11 On:0.25 / Off:0.25 / On:0.25 / Off:4.25
12 On:1.0 / Off:3.0
13 On:0.25 / Off:0.25 / On:0.25 / Off:2.25
3. Press Hold key to confirm the entry and step to the next option.
 Program20-15-03
Sets the ring pattern for internal calls
Internal Call Ring Pattern
1. After Log-In to the Programming Mode.
If you already Log-In the programming mode, skip this operation.
2. Dial 20 15 03. Change the ring pattern(1-13) for outside calls, if
require.
No. Ring Cycle
1 On
2 On:2.0 / Off:4.0
3 On:1.0 / Off:2.0
4 On:0.5 / Off:0.5
5 On:0.25 / Off:0.25
6 On:0.5 / Off:0.5 / On:0.5 / Off:1.5
7 On:0.25 / Off:0.25 / On:0.25 / Off:5.25
8 On:0.375 / Off:0.25 / On:0.375 / Off:2.0
9 On:0.25 / Off:0.125 / On:0.25 / Off:0.125 / On:0.25 / Off:2.0
10 On:1.0 / Off:4.0
Program Mode
20-15-03
Internal INC 8
20-15-01
TRK Normal INC3
Program Mode