SL1000 Getting Started Guide
6
SL1000 System Multi-line Telephones
There are two types of SL1000 System Multi-lineTelephones available.
IP4WW-12TXH-A TEL IP4WW-24TXH-A TEL
Terminal Type
Hybrid (4Wire)
Multi-Line Terminal
Hybrid (4Wire)
Multi-Line Terminal
Connected to Hybrid Extension Port Hybrid Extension Port
Color Line-Up Black/White Black/White
LCD
16 digits x 2 lines
w/o Backlit
16 digits x 2 lines
w/o Backlit
Programmable Keys
12
(BLF : Red/Green)
24
(BLF : Red/Green)
Soft Keys No No
Menu Cursor Key Yes Yes
Incoming LED
2 colors
(Red/Green)
2 colors
(Red/Green)
Handsfree Half-duplex Half-duplex
Backlit Dial Pad No No
Headset Port
No
(use Handset Port)
No
(use Handset Port)
Angle Adjustment 2-steps 2-steps
Wall Mounting Kit Built-In Built-In
You can connect up to 8 SL1000 system Multi-line telephones to any of the station connections. (If you need
more telephones you will need to install optional cards). The SL1000 system Multi-line telephones have
illuminated function keys that can be tailored to your own requirements.
The SL1000 system Multi-line telephones have a LCD display will show information about who is calling you, the
call you are on or the feature you are using.
Each Multi-line telephone is connected to the SL1000 system via a RJ11 4-way socket. The cables are
supplied with the telephone.
There is also a SL1000 DSS Consoles available; this gives busy lamp indication and can be installed alongside
a System Multi-line telephone for use by system operator (DSS console takes one hybrid station port).
IP4WW-60D-A DSS
Terminal Type
Hybrid (4Wire)
DSS Console
Connected to
Ext. Port No.8
at each card
Color Line-Up Black/White
Programmable Keys
60
(BLF : Red/Green)
Angle Adjustment 2-steps (Base)
Wall Mounting Kit Built-In
To Next Page
Loading...
