SL1000 Getting Started Guide
37
2. Dial 14 07 01, Enter the TAM Number and press DND/CONF key to
Select Trunk number (001-126) and Next step.
(e.g. Extension Number: 200 )
3. Enter the Access Property Number (0-7) for each trunk, you can
overwrite the current entry.
0 – No access
1 – Outgoing only
2 – Incoming only
3 – Retrieve held call only
4 – Outgoing and retrieve held call
5 – Incoming and retrieve held call
6 – Incoming and outgoing
7 – Incoming, outgoing and retrieve held call
4. Press Hold key to confirm the entry and step to the next option.
5. Press Mute key several times when you are done to return to the
Program Mode.
6. Press Speaker key to save changes and exit if you are finished.
See Also:
Changing the Telephone Ringing Assignment.
Configuration Sheet: Outgoing Exchange Line Access
With defaults shown.
Give each telephone a TAM number.
PRG
15-06-01
TAM Number for each day/night mode
Default=TAM1 for all modes
Telephone 1 2 3 4 5 6 7 8
200
201
202
203
204
205
206
207
There are 126 TAM numbers available.
Give each exchange line the access properties for the TAM number.
PRG 14-07-01
TAM
Number
Trunk 1 Trunk 2
Trunk 3
Trunk 4
1
7 7 7 7
2
0 0 0 0
3
0 0 0 0
4
0 0 0 0
5
0 0 0 0
Values available:
0 – No access
1 – Outgoing only
2 – Incoming only
3 – Retrieve held call only
4 – Outgoing and retrieve held call
5 – Incoming and retrieve held call
6 – Incoming and outgoing
7 – Incoming, outgoing and retrieve held
Although there are 126 TAM numbers available only 5 are listed as this is normally sufficient.
14-07-01Acs.M1
TRK 001 = 7
14-07-01Acs.M1
TRK 001 = 7
To Next Page
Loading...
