NEC SL1000 - Page 44

SL1000 Getting Started Guide
42
Operation Display shows;
1. After Log-In to the Programming Mode.
If you already Log-In the programming mode, skip this operation.
2. Dial 11 07 01, For each group enter the pilot number (3 digits
required), you will dial to reach the group and Press Hold key to confirm
the entry and step to the next group.
If you duplicate a number you will
see Duplicate Data, the entry will be removed and you can enter a new
number.
3. Press Mute key several times when you are done to return to the
Program Mode.
4. Press Speaker key to save changes and exit if you are finished.
See Also:
There are no related settings.
Configuration Sheet: Department Groups
With defaults shown.
Telephone
number
Department
Group
number
16-02-01
default=1
Priority
number
16-02-02
200 1
201 2
202 3
203 4
204 5
205 6
206 7
207 8
Department
Group
number
1-32
Pilot
Number
11-07-01
Ring in
priority/random
16-01-02
default=0 Priority
Try once or
continually
16-01-04
default=0 Once
Ring time
before step on
16-01-09
default=15 seconds
1
2
3
4
There are 32 groups available, only 4 are listed as this is usually sufficient.
Program Mode
11-07-01TEL Gr1
ExtGrNo.