NEC U321H - Setting | Signal

39
... English
User Controls
SCREENIMAGE SETTING OPTIONS
GENERAL SIGNAL
PHASE
CLOCK
H. POSITION
V. POSITION
COMPUTER
SELECT EXIT MOVE MOVE
ADVANCED
PHASE
Synchronize the signal timing of the display with the graphic card.
If the image appears to be unstable or ickers, use this function to
correct it.
CLOCK
Change the display data frequency to match the frequency of
your computer’s graphic card. Use this function only if the image
appears to icker vertically.
H. POSITION

Press the button to move the image left.

Press the button to move the image right.
V. POSITION

Press the button to move the image down.

Press the button to move the image up.
“SIGNAL” is
only supported in
Analog VGA (RGB)
signal.
SETTING |
SIGNAL