NEC UM361X - Turning on the Projector

14
2. Projecting an Image (Basic Operation)
 Turning on the Projector
• Pressthe (POWER) button on the projector cabinet
or the POWER ON button on the remote control.
 ThePOWERindicatorwillblinkandtheprojectorwillbe-
come ready to use.
TIP:
• Whenthemessage“Projectorislocked!Enteryourpassword.”
isdisplayed,itmeansthatthe[SECURITY]featureisturnedon.
(→page33)
After you turn on your projector, ensure that the computer
or video source is turned on.
NOTE:Whennoinputsignalispresent,theno-signalguidanceis
displayed(factorymenusetting).
(→page128)
Standby Blinking PowerOn
Steady red light
Blinking blue light Steady blue light