TO HOLD A CALL DT300 Series
Press HOLD key. Held line wink flashes.
Held station
number
HOLD 2001
4:26 PM TUE 13 APR 2004
Note: If held line appears on other DT Series stations,
the associated LED flashes red slowly.
To Retrieve
Lift handset or press Speaker key.
Press held line. Use handset to converse.
Note: Any station with this line appearance can retrieve
the call.
If unanswered
After preprogrammed time, Automatic Recall is initi-
ated.
Visual and audible signal (rapid flash and ring
burst) is sent to station that placed call on hold.
Note: Hold shows as a flashing green LED on your
phone. The same line on other phones shows as a
flashing red LED. Recall shows as a flashing
green LED on your phone and flashing red LED on
other phones with the same line.
TO PLACE A CALL ON EXCLUSIVE
HOLD DT300 Series
Press HOLD key twice. Line appearance indi-
cates interrupted wink.
Held station
number
E_HOLD 2001
4:26 PM TUE 13 APR 2004
Note: If held line appears on other DT Series stations,
LED remains steadily lit red.
To Retrieve
Lift handset or press Speaker key.
Press held line. Use handset to converse.
Note: Only the DT Series that set Exclusive Hold option
can retrieve the call.
To Next Page
Loading...
