CALL FORWARDING - ALL CALLS
OVERRIDE 2001
4:26 PM TUE 13 APR 2004
MIC >>>
Note: Override may be programmed by the Telephony
Server Admin. for one of the Programmable fea-
ture keys, or may be programmed by the user on
a One-Touch Speed Calling key by storing the
Recall and Override access code.
LAST NUMBER REDIAL DT300 Series
To Recall Last Number Dialed
Press Redial key. Last number dialed is displayed.
LNR[# or ]/SPD[_ _] ‚Ä
XXXXXX
Press Redial key until desired number is dis-
played. Up to 5 previously dialed numbers.
Press # or . The number on the display is auto-
matically redialed.
When party has answered, lift handset or speak
hands-free.
Note: A-law Countries [Australia, Russia, Latin Amer-
ica, UK, Middle near East, other Asian nations]:
#
µ-law Countries [North America, Japan, Hong
Kong, Taiwan]:
DT300 Series
To Set
Press Speaker key. Receive dial tone.
If setting for another station, press MULTILINE
APPEARANCE.
Press FDA or dial “Call Forwarding - All Calls”
access code. Receive special dial tone.
Dial destination station or external telephone num-
ber. Receive service set tone.
FDA LED lights (at your station or at the DT Series
of the multiline station you are setting).
Press Speaker key. Call Forwarding - All Calls is
set.
Forwarding
station
FORWARD SET 2000
4:26 PM TUE 13 APR 2004
Using Soft Key
Press FDA Soft Key. Receive special tone.
Dial destination; wait for service set tone.
“FORWARD SET” is displayed, call forwarding for
all calls is set.
FORWARD SET
4:26 PM TUE 13 APR 2004
MIC >>>
To Next Page
Loading...
