Using Soft Key
Press FDB Soft Key. Receive special dial tone.
Dial destination; wait for service set tone.
“FORWARD SET” is displayed; Call Forwarding -
Busy Line is set.
FORWARD SET
4:26 PM TUE 13 APR 2004
MIC >>>
To Verify (Only For Terminal With LCD)
Press FWD-BY.
Display indicates the station number calls are for-
warded to.
Forwarding station
FORWARD 2000
4:26 PM TUE 13 APR 2004
Note: With Soft Key operation, FDB flashes on the dis-
play.
To Cancel
Press Speaker key. Receive dial tone. If canceling
for another station, press MULTILINE APPEAR-
ANCE.
Press FWD-BY or dial “Call Forwarding - Busy
Line” cancel code. Receive service set tone. LED
goes out at your station (or the DT Series of the
multiline station).
Press Speaker key. Call Forwarding - Busy Line is
cancelled.
FORWARD CANCEL
4:26 PM TUE 13 APR 2004
Using Soft Key
Press FDB Soft Key.
Receive service set tone and “FORWARD CAN-
CEL” is displayed.
FORWARD CANCEL
4:26 PM TUE 13 APR 2004
MIC >>>
CALL FORWARDING - DON’T
ANSWER DT300 Series
To Set
Press Speaker key. Receive dial tone.
If setting for another station, press MULTILINE
APPEARANCE.
Press FDN or dial “Call Forwarding - Don’t
Answer” access code. Receive special dial tone.
Dial destination station or external telephone num-
ber. Receive service set tone.
FDN LED lights (at your station or at the DT
To Next Page
Loading...
