NEC UNIVERGE DT300 Series - Page 36

Series of the multiline station you are setting).
Press Speaker key. Call Forwarding - Don’t Answer
is set.
Forwarding
station
FORWARD SET 2000
4:26 PM TUE 13 APR 2004
Using Soft Key
Press FDN Soft Key. Receive special dial tone.
Dial destination; wait for service set tone.
“FORWARD SET” is displayed; Call Forwarding -
Don’t Answer is set.
FORWARD SET
4:26 PM TUE 13 APR 2004
MIC >>>
To Verify (Only For Terminal With LCD)
If verifying for another station, press MULTILINE
APPEARANCE while idle.
Press FDN.
Display indicates the station number calls are for-
warded to.
Forwarding
station
FORWARD 2000
4:26 PM TUE 13 APR 2004
Note: Call Forwarding for Busy Line and Don't Answer
may be combined depending upon system pro-
gramming.
Note: With Soft Key operation, FDB flashes on the dis-
play.
To Cancel
Press Speaker key. Receive dial tone. If canceling
for another station, press MULTILINE APPEAR-
ANCE.
Press FDN or dial "Call Forwarding - Don't
Answer" cancel code. Receive service set tone.
LED goes out at your station (or the DT Series of
the multiline station).
Press Speaker key. Call Forwarding - Don’t Answer
is cancelled.
FORWARD CANCEL
4:26 PM TUE 13 APR 2004