NEC UNIVERGE DT300 Series - Call Pick-Up (Group); Call Pick-Up (Direct)

Station that
parked the call
2000 DDD 2
4:26 PM TUE 13 APR 2004
CALL PICK-UP (GROUP) DT300 Series
Called Calling
station party
PICK UP 2000 2001
4:26 PM TUE 13 APR 2004
MIC >>>
CALL PICK-UP (DIRECT)
DT330/310
When Station Within Pick-up Group Rings
Lift handset.
Press CALL PICK-UP or dial “Call Pick-up” access
code (may be stored on One-Touch Speed Calling
key).
Connection to calling party is established.
If currently on a call, press Transfer key and dial
“Call Pick-up” access code.
The original party is placed on hold.
Called Calling
station party
PICK UP 2000 DDD 3
4:26 PM TUE 13 APR 2004
Using Soft Key
Lift handset and press PICK Soft Key.
Connection to calling party is established.
To Program Pick-up Direct Key (One-
Touch Speed Calling Key)
Press Feature key.
Press One-Touch Speed Calling key.
Dial “Direct Call Pick-up” access code.
Press Feature key again.
When A Station Within System Rings
Lift handset, receive dial tone.
Press PICK-DIRECT and dial the station number to
be picked up.
- Or -
Dial “Direct Call Pick-up” access code and the sta-
tion number to be picked up.
Connection to calling party is established.
If busy, original call must be placed on hold before
new call can be picked up.