EasyManua.ls Logo

NEC UNIVERGE DT300 Series - Call Forwarding - Busy Line

NEC UNIVERGE DT300 Series
41 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
To Verify (Only For Terminal With LCD)
Press FDA.
Display indicates the station number calls are for-
warded to.
Forwarding
station
FORWARD 2000
4:26 PM TUE 13 APR 2004
Note: With Soft Key operation, FDB flashes on the dis-
play.
To Cancel
Press Speaker key. Receive dial tone. If canceling
for another station, press MULTILINE APPEAR-
ANCE.
Press FDA or dial “Call Forwarding - All Calls”
cancel code. Receive service set tone. LED goes
out at your station (or the DT Series of the multiline
station).
Press Speaker key. Call Forwarding - All Calls is
cancelled.
FORWARD CANCEL
4:26 PM TUE 13 APR 2004
Using Soft Key
Press FDA Soft Key.
Receive service set tone and FORWARD CAN-
CEL is displayed.
FORWARD CANCEL
4:26 PM TUE 13 APR 2004
MIC >>>
CALL FORWARDING - BUSY LINE
DT330/310
To Set
Press Speaker key. Receive dial tone.
If setting for another station, press MULTILINE
APPEARANCE.
Press FWD-BY or dial Call Forwarding - Busy
Line access code. Receive special dial tone. Dial
destination station or external telephone num-
ber. Receive service set tone.
FWD-BY LED lights (at your station or at the DT
Series of the multiline station you are setting).
Press Speaker key. Call Forwarding - Busy Line is
set.
FORWARD SET
4:26 PM TUE 13 APR 2004

Related product manuals