5.
F
EATURE
O
PERATION
TO ORIGINATE A CALL USING
SPEED CALLING (ONE-TOUCH
SPEED CALLING KEYS) DT300 Series
Press the desired One-Touch Speed Calling key,
or press Speaker key and One-Touch Speed Call-
Display indicates digits programmed.
Note: To program a hook switch for transfer or feature
activation, press Recall key as first digit. (! dis-
plays on LCD.)
Note:
ing key.
To Program
(Available only on DT Series with One-Touch Speed
Calling key.) (SPD)
Press Feature key.
Press desired One-Touch Speed Calling key.
Enter desired telephone number or feature access
code on the keypad.
Display indicates the digits dialed.
Press Feature key again to save the number.
SPEED SET
4:26 PM TUE 13 APR 2004
To Verify
Press Feature key.
Press desired One-Touch Speed Calling key.
To program a pause, press the Recall key as
any digit other than the first digit. (
-
displays on
LCD.)
Note: To program a Voice Call, press Transfer key after
dialing station number. (V displays on LCD.)
Note: One-Touch Speed Calling key for feature access:
One-Touch Speed Calling key may be used as a
feature key by storing the UNIVERGE SV7000
feature access code. The features may be pro-
grammed on a system basis by the Telephony
Server Admin.
Access codes may be stored in conjunction with
telephone numbers. For example, one button can
be programmed by the user to transfer to a certain
extension.
To Next Page
Loading...
