8
Note: If the unavailable extension was unanswered (not busy), the Callback goes
through after your co-worker uses their telephone for the first time.
To cancel a Callback:
1. Press idle Speaker key and dial 870.
14
Message Waiting – Call busy or unanswered extension
1. Dial 726 or press MW softkey.
3. Hang up.
To answer a Message Waiting: Note: When you have a message, your MW LED
flashes.
1. Press the softkey under MW. Look on the screen for the name of the person that
left you a message waiting light. You can call them or press the Speaker key and
dial 841.
Note: If the called extension does not answer, dial 726 or press your Message
Waiting key to automatically leave them a message.
To cancel all your Messages Waiting:
1. Press the Speaker key.
2. Dial 873.
3. Hang up.
To cancel the Messages Waiting you have left at a specific extension:
1. Press the Speaker key.
2. Dial 871.
3. Dial number of extension you do not want to have your messages.
4. Hang up.
Tone Override
To send off-hook signals to an extension busy on a call:
Note: Your extension may send off-hook signals automatically.
1. Dial 809.
2. Press the Off-Hook Signaling key (Service Code 751: 33). Note: You hear Ring Busy
Tone.
Note: The called extension hears Call Alert Notification.
To answer Tone Override:
1. Receive Tone Override.
2. Press the Hold key and talk with the party.
9
Repeat Redial
To use Repeat Redial (if the outside party you call is unavailable or busy):
1. Place a trunk call. Note: Listen for busy tone or ring-no-answer.
2. Press the Feature + Redial keys. Note: Your Repeat Redial key flashes while you
wait for the system to redial.
3. Press Speaker to hang up. Note: The system periodically redials the call.
To Next Page
Loading...
