NEC Univerge SV8100 - Page 56

Issue 1.0 UNIVERGE SV8100
3 - 16
R ip info 8
This command shows the CD-CP00-US IP Address information entered in
PRG10-12.
R ip info 9 <slot number>
This command shows the VoIPU IP Address information entered in PRG84-05.
The slot number should be entered in hex.
R ip info a <slot number>
This command shows the registration status of H.323/SIP trunks. This will show
as “Registered” or “not Registered”.
Example:
[ CCPU IP Info ]
IP Addr : 192.168. 1. 20
Sub Net Mask : 255.255.255. 0
Default Gatway : 192.168. 1.254
Time Zone : 21
NIC : Auto Detect
Example:
IP INFO 9 8
[ VoIPU PKG IP Address ]
slot08 IP Addr = 172. 16. 0. 27 NIC : Auto Detect
----------------------------------
IP TRUNK REGISTRATION INFORMATION
----------------------------------
H.323 TRUNK:
not REGISTERED to GK (SD)
SIP TRUNK:
[RegId0][UserId:] not REGISTERED to SIP Server(1/30 8:50)
[RegId1][UserId:] not REGISTERED to SIP Server(1/30 8:50)
[RegId2][UserId:] not REGISTERED to SIP Server(1/30 8:50)
[RegId3][UserId:] not REGISTERED to SIP Server(1/30 8:50)
[RegId4][UserId:] not REGISTERED to SIP Server(1/30 8:50)
[RegId5][UserId:] not REGISTERED to SIP Server(1/30 8:50)
[RegId6][UserId:] not REGISTERED to SIP Server(1/30 8:50)
[RegId7][UserId:] not REGISTERED to SIP Server(1/30 8:50)
[RegId8][UserId:] not REGISTERED to SIP Server(1/30 8:50)
[RegId9][UserId:] not REGISTERED to SIP Server(1/30 8:50)
[RegId10][UserId:] not REGISTERED to SIP Server(1/30 8:50)
[RegId11][UserId:] not REGISTERED to SIP Server(1/30 8:50)
[RegId12][UserId:] not REGISTERED to SIP Server(1/30 8:50)
[RegId13][UserId:] not REGISTERED to SIP Server(1/30 8:50)
[RegId14][UserId:] not REGISTERED to SIP Server(1/30 8:50)
[RegId15][UserId:] not REGISTERED to SIP Server(1/30 8:50)
[RegId16][UserId:] not REGISTERED to SIP Server(1/30 8:50)
[RegId17][UserId:] not REGISTERED to SIP Server(1/30 8:50)
[RegId18][UserId:] not REGISTERED to SIP Server(1/30 8:50)
[RegId19][UserId:] not REGISTERED to SIP Server(1/30 8:50)