proceed:
–
in the main menu: proceeds to the selected menu choice
(indicated by the highlighted area).
–
in a submenu: proceeds to the control in that sub-menu.
reset:
Resets the currently highlighted control to the factory settings;
–
in the main menu: resets all the controls within the highlighted
submenu.
–
in a submenu: reset the highlighted control.
Note: When pressed, a warning window will appear allowing you to
cancel the reset function.
Front panel controls outside of OSM controls are:
Degauss:
–
eliminates the build-up of stray magnetic fields which alter the
correct scan of the electron beams and affect the purity of the
screen colours, focus and convergence.
–
When pressed, your screen image will jump and waver a bit as
the screen is demagnetized.
Caution:
Please allow a minimum of 20 minutes to elapse between uses
of the Degauss button. Do not hold the button down continuously to
avoid decreasing the life of the degauss circuitry.
E-16 OSM Controls
To Next Page
Loading...
Need help?
General