Necta Astro - 3 Installation; Unplug the Machine from the Power Mains; Disassembly of the Door

Necta ASTRO Touch screen upgrade kit by QUVEND Zrt.- MANUAL
5
3 Installation
3.1 Unplug the machine from the power mains
3.2 Disassembly of the door
A. Remove the door back covers
B. Remove the side door cover
C. Remove the upper plastic cover
D. Disconnect and remove the keyboard and the console above
E. Remove the mid cover
F. Remove the cup door (this is not going to be replaced)
Step B Step C / D Step E
Starting point
Step A
Step B
Step B
Step C abd D
Step E