Necta BRIO "Easy Serving Espresso" User Manual

TECHNICAL MANUAL “ Brio Easy serving Espresso“
Manual Brio ESE 11 / 17
BREWER UNIT MAINTENANCE
Before any maintenance operations and adjustments it is necessary to wait for the unit to cool down
completely.
Cleaning / replacing the coffee filters
The coffee filters must be cleaned and descaled at least every 2500 selections. To remove the lower filter,
the flow-through boiler must be lifted (hinged to the brewer) after removing the keys 1 (front and if
necessary back), this way access is gained to the lower filter; using a screwdriver lift the edge until removed
completely. Clean and descale using suitable products. To replace the filter, press on the edges until
reinserted completely.
Upper filter
To remove the upper filter 2, undo the stainless steel screw
1.
This operation is possible after removing the upper boiler (see
above).
Filters and gaskets must be replaced not later than 25000
selections.
Upper boiler
opening keys
Lower piston
Lower filter
1
2
Boiler and brewing chamber section
1

Necta BRIO "Easy Serving Espresso" Specifications

General

Brand	Necta
Model	BRIO "Easy Serving Espresso"
Category	Coffee Maker
Language	English