Need help?Do you have a question about the Necta brio 3 and is the answer not in the manual?
General| Brand | Necta |
|---|---|
| Model | brio 3 |
| Category | Coffee Maker |
| Language | English |
Describes the operations carried out during the machine's normal vending use.
Details the machine's startup sequence and initial display messages.
Explains user operations performed without opening the machine door.
Indicates the machine is heating water to reach normal operating temperature.
Prompts the user to make a drink selection by pressing a button.
Confirms the selected drink preparation is complete and ready for pickup.
Signals that the machine is not operational due to a failure.
Steps to access the programming menu using the front door and a key.
Explains the function of scrolling, confirm/enter, and exit buttons.
Managing and printing of statistical data for selections, failures, and coin mechanism.
Allows setting individual prices for each product selection and time bands.
Manages the filling and releasing of change tubes for currency.
Displays and allows setting of boiler operating temperatures.
Configuration for GSM modem for sending machine status signals.
Configuration for EVADTS protocol for data transfer.
How to view current and past machine failures.
Procedure for clearing logged machine failures.
Controls payment system parameters and sales prices, including time bands.
Defines programmable time intervals for different pricing.
Settings for coin mechanisms, including validation and change.
Settings for connecting machines in a master/slave network.
Configures water quantities for each selection.
Defines whipping time and mode for selections.
Configures powder quantities for instant products.
Enables/disables dispensing of cups, sugar, and stirrers.
Enables or disables sugar and stirrer dispensing for selections.
Enables or disables individual selection buttons.
Associates selection numbers with keypad buttons.
Assigns a 4-digit code to selections for statistics processing.
Sets the operating temperature for the machine's boilers.
Defines the water supply source (mains or internal tanks).
Enables heating the mixer with hot water before dispensing.
Optimizes dispensing time by eliminating post-whipping delays.
Sets a counter for displaying dispenser maintenance messages.
Configures the cup sensor for detecting objects in the dispensing compartment.
Sets the duration for the dispensing compartment lamp.
Sets the delay for stopping cup column rotation.
Sets the time for performing an automatic mixer wash cycle.
Improves appearance by dispensing powder before water for decaf drinks.
Sets maximum selections before machine disabling.
Enables/disables coffee pre-grinding to reduce dispensing time.
Sets solenoid valve opening time for tea brewing.
Selects the language for menus and normal vending mode.
Enables and sets a custom promotional message on the display.
Adjusts the LCD display contrast level.
Dispenses product without dispensing a cup.
Changes the percentage of product dispensed for a pre-selection.
Assigns discount or overprice to a pre-selected option.
Dispenses the maximum set sugar dose with the drink.
Increases or decreases the sugar amount cyclically.
Increases or decreases water amount in coffee/tea selections.
Adjusts powder strength (pre-selection not available).
Makes a coffee-based selection using the second available coffee type.
Increases milk dose amount for milk-based selections.
Decreases water dose for a 'mokka' type drink.
Sets the number of consecutive selections to fill a jug.
Sets and enables passwords for accessing menus and resetting counters.
Determines which Filler menu functions are active or disabled.
Saves electric power by enabling automatic switch-off of the boiler.
Sets the standby position of the Z3000 espresso unit.
Sets the time for daily automatic washing of the espresso unit.
Sets continuous operation of exhauster fans for instant products.
Enables brewer unit heating before coffee brewing.
Displays and resets general selection counters.
Shows various statistical data like single, total, and maintenance counters.
Shows counts based on defined time bands.
Shows accumulated discounts and overprices.
Shows the number of occurrences for each possible failure.
Shows audit data and cashed amounts from the coin mechanism.
Deletes specific counters like selections, discounts, failures, or coin data.
Deletes all statistical data from the machine.
Shows relative counts for single, total, and maintenance selections.
Shows relative counts based on defined time bands.
Shows relative accumulated discounts and overprices.
Shows relative occurrences of machine failures.
Shows audit data, including coins inserted by type.
Shows total cashed, sold, and cashed by credit amounts.
Deletes specific relative counters like selections, discounts, failures, or coin data.
Deletes all relative statistics from the machine.
Enables display of total counters when the machine is switched on.
Prints specific counters like selections, time bands, discounts, failures, or coin data.
Prints all statistical data from the machine.
Prints relative counters for selections, time bands, discounts, failures, or coin data.
Prints all relative statistical data from the machine.
Performs dispensing tests for complete products, water, powder, or accessories.
Tests full product dispensing without requiring payment.
Operates the espresso brewer unit.
Starts the grinder and releases a coffee dose.
Opens a solenoid valve to allow air intake for boiler emptying.
Manually installs boilers and fills the water system.
Performs a semiautomatic test of main machine components.
Stores the current date as the machine's installation date.
Sets an 8-digit code to identify the machine.
Sets a 6-digit code to identify the group of machines.
Resets machine data to default values, used for errors or software replacement.
Sets a 4-digit alphanumeric code for machine identification.
Sets an alphanumeric code for reciprocal recognition with EVADTS terminal.
Places the machine in wait mode for data retrieval connection.
Selects communication interface (IrDA, RS232, Always EVADTS).
Sets communication speed (Enhanced or Standard 9600bps).
Loads or saves setup files using the Up-Key.
Deletes individual or all setup files from the Up-Key.
Loads or saves statistics files using the Up-Key.
Deletes all statistics files from the Up-Key.
Selects the target vending machine in a bank for Up-Key operations.
Programs the identification code sent to the GSM modem.
Defines thresholds for pre-alarms and resets pre-alarm counters.
Identifies the bank number for slave machines sending data via modem.
Covers water supply, air-break, and impeller issues.
Addresses instant and espresso boiler heating, and machine control board errors.
Details coin mechanism communication, machine lock, coffee unit, and grinder problems.
Covers espresso boiler, RAM data errors, and grinder blockages.
Covers issues with fresh brew piston and scraper positioning.
Explains conditions that lock espresso or instant product selections.
Configures validator lines and available payment systems for Executive.
Manages BDV vending modes, credit, change, and coin acceptance.
Configures exact amount mode, CPC device, minimum tube levels, and free vend.
Manages MDB vending modes, credit, change, and coin acceptance/return.
Sets minimum coin levels and defines accepted bills and coins.
Manages cashless credit, overpay, cash sales, and parallel devices.
Defines coin tube combinations for the exact amount mode.
Sets the maximum credit acceptable via key or cashless card.
Sets the maximum credit that can be loaded in a cashless system.
To Next Page