Necta brio 3 - 2. Set Single Prices; 3. Tubes Control

P2595EN01
08 - 2007

7
2 - SET SIN. PRICES
2.1 - SELECTION PRICE
2.2 - POWDER 2 PRICE
2
se t t I n g s I n g l e P r I c e s
This function is used for setting a dierent price for each selection.
2.1
s
e l e c t I o n P r I c e
2.2
de c a f f e I n a t e d Pr I c e
This function is used for setting the sales price for each selection
during time band 1 (if set).
3 - TUBES CONTROL
3.1 - FILL TUBES
3.2 - RELEASE TUBES
3
ch a n g e t u b e s c o n t r o l
3.1
fI l l I n g t h e c h a n g e t u b e s
From this function, the change tubes can be lled manually.
Conrming the relling, the display will indicate
“Credit: ——” which is the value of money available in the change
tubes; insert the desired coin into the validator and the display will
indicate the value of money available in the change tubes.
3.2
r
e l e a s I n g t h e c h a n g e t u b e s
From this function, the change tubes can be released manually.
When conrming the releasing, it will be possible to decide which
tube to release. Each time the conrm button is pressed, a coin is
ejected from the active tube.