Necta brio 3 - Technician Menu - Miscellaneous Settings; 2.6.1 Jug Facilities; 2.6.2 Password Management; 2.6.3 Enable Filler Menu Functions

P2595EN01
08 - 2007

24
2.6 - MISCELLANEOUS
2.6.1 - JUG FACILITIES
2.6.2 - PASSWORD
2.6.2.1 - SET PASSWORD
2.6.2.2 - ENABLE PASSWORD
2.6
mI s c e l l a n e o u s
2.6.1
Ju g fa c Il I tI e s
This function is used for setting a programmable number (1 to 9; 5
by default) of consecutive selections to ll a jug.
2.6.2
P
a s s w o r d
This function is used for setting a password for accessing the
“Technician menu” mode.
2.6.2.1
s
e t t I n g t h e P a s s w o r d
Enter a 5-digit numeric code to be set as the password.
2.6.2.2
e
n a b l I n g t h e P a s s w o r d
This function is used for enabling or disabling the password request
when accessing the “Technician menu” mode (disabled by default).
2.6.2.3 - PWD AZZ. CONTAT.
2.6.2.4 - PWD LAVAGGI
2.6.2.3
co u n t e r r e s e t P a s s w o r d
This function is used for setting the password for resetting the
counters set with the function “Counter maximum number”.
w
a s h P a s s w o r d
This function is used for setting the password that must be entered
while in normal vending mode (with the door closed) for performing
a mixer wash cycle
2.6.3 - ENABLE FILL MENU
2.6.3
en a b l I n g t h e fI l l e r m e n u
This function is used for determining which of the “Filler menu”
functions are to be left active and which are to be disabled. The
reference numbers of the menus do not change even if some are
disabled.