Necta brio 3 - Technician Menu - Failures; 1.1 Reading Failures; 1.2 Reset Failures

P2595EN01
08 - 2007

10
1 - FAILURES
1.1 - READING FAILURES
1.
f
a I l u r e s
1.1
re a d I n g t h e f a I l u r e s
When the “Failure” function is displayed, press the conrm button
“

” to display the present failures.
If no failures are currently present, after pressing the conrm button
“

” the message “End failures” will be displayed.


1.2
r
e s e t t I n g t h e f a I l u r e s
By conrming this function all current failures will be reset.
1.2 - RESET FAILURES