Necta brio 3 - Technician Menu - Product Settings; 2.3.C Decaffeinated Cycle; 2.3.D Counter Maximum Number; 2.3.E Pre-Grinding

P2595EN01
08 - 2007

20
2.3.C - DEC. CYCLE
2.3.D - NUM. MAX CONTAT.
2.3.E - PREGRINDING
2.3.F - INFUSION TIME
2.3.c
de c a f f e I n a t e d c y c l e
For the purpose of improving the appearance of the drink the
lyophilised instant product powder (if present) is dispensed before
dispensing water into the mixer.
2.3.d
c
o u n t e r m a x I m u m n u m b e r
This function is used for setting the maximum number of selec-
tions to be reached for the purpose of disabling the machine. The
counters can be set for the following selections:
- Espresso
- Instant
- Espresso + Instant
When setting a new value for the counter, the previous count is
cancelled.
This function is active if the counter reset password was set before
hand.
2.3.e
P
r e -g r I n d I n g
This function is used for enabling/disabling the grinding of coee for
the next selection. This permits the reduction of dispensing time for
a coee selection. The function is disabled by default.
2.3.f
b
r e w I n g t I m e (f r e s h -b r e w t e a )
This function (enabled only in fresh-brew tea models) permits open-
ing of the tea dispensing solenoid valve for a length of time, set in
tenths of a second, and delivering of a small amount of water onto
the product in order to dampen it before the actual brewing cycle.