Necta brio 3 - Technician Menu - Database Initialization; 5.2 Initialising Data-Base

P2595EN01
08 - 2007

38
5.2 - INITIALIZ. DB
5.2
In I tI a lI s In g t h e d a t a -b a s e
This function is used for “initialising” the machine, resetting all data
to default values. This function should be used if there is a memory
data error or when the software is replaced. Except for the general
electronic counter, all statistical data is reset.
When conrming this function some parameter settings are request-
ed, and namely:

Intended as type of basic doses for the dierent selections. The
available “countries” vary according to the models.

A number of Button/Selection combinations to choose from is
provided for each dose type model (the combinations available for
each layout are indicated in the dose selection table supplied with
the machine).

Dening whether the water supply is:
0 - from the mains
1 - from an internal tank
2 - from two internal tanks .