Necta brio 3 - Technician Menu - Up Key Management; 5.4.1 Setup Management; 5.4.1.3 Delete Setup Files; 5.4.2 Statistics Management

P2595EN01
08 - 2007

40
5.4
uP k e y
5.4.1
se t u P c o n t r o l
5.4.1.1
uP-ke y -> v e n d I n g m a c h I n e
When conrming this function after inserting the Up-Key in the
special port located on the C.P.U. board, it will be possible to select
the setup le from the list shown on the display using the scrolling
buttons, then when conrming with the conrm button the selected
setup will be loaded in the vending machine.
5.4.1.2
v
e n d I n g m a c h I n e -> uP-ke y
When conrming this function after inserting the Up-Key in the
special port located on the C.P.U. board, it will be possible to save
the setup le to the Up-Key with the conguration present in that
moment in the vending machine, indicating the name to be assigned
to the le.
5.4.1.3
d
e l e t e
This function is used for deleting one by one the setup les present
in the inserted Up-Key.
5.4.1.4
d
e l e t e a l l
This function is used for deleting all the setup les present in the
inserted Up-Key.
5.4.2
s
t a t I s t I c s m a n a g e m e n t
5.4.2.1
ve n d I n g m a c h I n e -> uP-ke y
When conrming this function after inserting the Up-Key in the
special port located on the C.P.U. board, it will be possible to save
the statistics le to the Up-Key with all of the statistics les present
in that moment in the vending machine, indicating the name to be
assigned to the le
5.4 - UPKEY
5.4.1 - SETUP MANAGEMENT
5.4.1.1 - UPKEY -> MACHINE
5.4.1.2 - MACHINE -> UPKEY
5.4.1.3 - DELETE
5.4.1.4 - DELETE ALL
5.4.2 - AUDIT MANAGEMENT
5.4.2.1 - MACHINE -> UPKEY
5.4.2.2
de l e t e
This function is used for deleting one by one the statistics les
present in the inserted Up-Key.
5.4.2.2 - DELETE
5.4.2.3
de l e t e a l l
This function is used for deleting all the statistics les present in the
inserted Up-Key.
5.4.2.3 - DELETE ALL