Necta brio 3 - Technician Menu - Autotest; 4.3 Autotest Routine

P2595EN01
08 - 2007

36
4.3
au t o t e s t
This function allows testing, in a semiautomatic way, of the main ma-
chine components. When pressing the conrm button, the message
"AUTOTEST" will be start blinking.
It is possible to cancel each operation and go to the next one by
pressing the exit button, but conrming with the conrm button to
start the autotest routine. Some checks occur automatically, others
need the manual operation of the monitored component.
In a sequence:
- Fan functioning test for 2 seconds.
- The doser units are activated for 2 seconds
- The mixers are activated for 2 seconds
- A cup is released
- A stirrer is released
- Rotation of the brewer unit
- Wash button test
- Waste container switch; the machine awaits until the waste con-
tainer micro-switch is manually operated
- Switching on of the dispensing compartment lamp (if tted)
- Push-button panel test; the machine will display the number of the
button which must be pressed and awaits the actuation before going
to the next button and to the boiler control
- Buzzer functioning test
- Coin mechanism functioning test
4.3 - AUTOTEST