Necta BRIO "Easy Serving Espresso" User Manual

TECHNICAL MANUAL “ Brio Easy serving Espresso“
Manual Brio ESE 7 / 17
MACHINE CONTROL BOARD CONFIGURATION
The machine board is designed with integrated the control system (CPU) and the actuations.
It was also conceived to be used in different machine models.
In the event of replacement it will be necessary to check that the new board configuration is suitable for the
required use.
Proceed as follows:
A series of 8 minidips (3) is located at the centre of the board permitting its configuration for use in the
different versions and countries. A jumper (5) is used to configure the board for Instant or Espresso
versions. The board has also provisions for supporting 512 Kb and 1 Mb EPROMs by setting Jumpers JS3
and JS4.
For the different configurations see the following tables:
LANGUAGE CONFIGURATION
LANGUAGE
Minidip Italian French Spanish
6 OFF ON OFF
7 OFF OFF ON
MODEL CONFIGURATION
Model Espresso
MINIDIP 5 OFF
Jumper 2 - 3
STIRRER CONFIGURATION
STIRRER
Dispensed also with
unsweetened
selections
Not dispensed
with unsweetened
selections
MINIDIP 2 ON OFF
PAYMENT SYSTEM CONFIGURATION (FRONT COIN MECHANISM)
MINIDIP
ON OFF
1 - Fixed to OFF
3
(validator only)
Credit control No credit control
4 - Validator
8 - Fixed to OFF
PAYMENT SYSTEM CONFIGURATION (SERIAL COIN MECHANISM)
SERIAL SYSTEM
DIP 3 DIP 4 DIP 5
Executive std.
U-Key URW 2
OFF OFF OFF
Executive Price
Holding
Parameter 36 = 2 )
OFF ON OFF
System ECS
ON OFF OFF
U-Key URW 3
OFF OFF ON
IMPORTANT NOTICE
Minidips that are not mentioned must be set to OFF.

Necta BRIO "Easy Serving Espresso" Specifications

General

Brand	Necta
Model	BRIO "Easy Serving Espresso"
Category	Coffee Maker
Language	English