23
© by NECTA VENDING SOLUTIONS SpA 0101 Brio C-I
Fig. 21
1 - Triac of the boiler heating element
2 - Temperature control trimmer
3 - Configuration minidips
4 - EPROM
5 - Jumper: 1-2 Instant versions
2-3 Espresso versions
JS3 - JS4 EPROM size jumpers
RELAY FUNCTION (see Wiring diagram)
ESPRESSO INSTANT
K1 = ER MF2
K2 = ESC MF1
K3 = MAC MD1
K4 = PM PM/EIA
K5 = M EV3
K6 = EV2 EV2
K7 = EV1 EV1
K8 = MF1 MF4
K9 = MD4 MD5
K10 = MD3 MD4
K11 = MD2 MD3
K12 = MD1 MD2
K13 = MSB MSB
K14 = MSP MSP
K15 = MSCB MSCB
K16 = EIA EV4
K17 = MF2 MF3
CONFIGURING THE MODEL
According to the model, minidip 5 and the jumper (see Fig.
21) shall be set as follows:
CONFIGURING THE STIRRER DISPENSER
The unsweetened drinks can be dispensed with or without
stirrers by setting minidip 2 to:
CONFIGURING THE PAYMENT SYSTEM
(versions with front coin mechanism)
For versions fitted with a front coin mechanism, the board
can be configured to operate with a 12 V validator by
setting minidips 1,3,4 and 8 as follows:
CONFIGURING THE PAYMENT SYSTEM
(versions with Serial coin mechanism)
The configurations available for serial payments sys-
tems are as follows:
Important notice:
Minidips which are not mentioned are to be set to OFF.
LEDOMTNATSNIOSSERPSE
5PIDINIMNOFFO
REPMUJ2-13-2
RERRITS
htiwdesnepsid
deneteewsnu
snoitceles
desnepsidton
deneteewsnuhtiw
snoitceles
2PIDINIMNOFFO
METSYSLAIRES3PID4PID8PID
.dtsevitucexE
2WRUyek-U
FFOFFOFFO
gnidllohecirpevitucexE
)3=63retemarap(
FFONOFFO
metsysSCENOFFOFFO
3WRUyeK-UFFOFFONO
PIDINIMNOFFO
1FFOotdexif
3
)ylnorotadilav(
lortnoctiderclortnoctidercon
4rotadilav
8FFOotdexif
To Next Page
Loading...
