WIM | INSTALLATION GUIDE
Content
2/20
CONTENT
1 INTRODUCTION _______________________________________________________ 3
1.1 KEY FEATURES __________________________________________________ 3
2 INSTALLATION ________________________________________________________ 4
2.1 SAFETY PRECAUTIONS ___________________________________________ 4
2.2 DIMENSIONS ___________________________________________________ 4
3 CONNECTIONS ________________________________________________________ 5
4 ANPR CONFIGURATION _________________________________________________ 7
4.1 PLATE READER SETTINGS _________________________________________ 7
4.1.1 EVENTS / ACTIONS ________________________________________ 7
4.2 SYSTEM SETTINGS _______________________________________________ 7
4.2.1 SERIAL PORTS ____________________________________________ 7
5 PLATE CONVERSION MODES ____________________________________________ 8
5.1 WIEGAND 26-BIT (SHA-1) _________________________________________ 8
5.2 WIEGAND 64-BIT ________________________________________________ 8
5.3 WIEGAND MATCH-LIST MODE ____________________________________ 10
5.4 MAGSTRIPE ISO7811 TRACK 1 ____________________________________ 11
5.5 MAGSTRIPE ISO7811 TRACK 2 ____________________________________ 12
5.6 BARCODE WAND EMULATION CODE39 ____________________________ 13
6 PROGRAMMER'S GUIDE _______________________________________________ 15
6.1 MESSAGE FORMAT _____________________________________________ 15
6.2 COMMAND MESSAGES __________________________________________ 15
A TECHINAL SPECIFICATIONS_____________________________________________ 18
B DISCLAIMER _________________________________________________________ 19
C DOCUMENT REVISION _________________________________________________ 20
To Next Page
Loading...
Need help?
General