Nederman NCF Series Instruction Manual

NCF
25
EN
5 Use
WARNING! Risk of personal injury.
• When moving, liing and installing the fan, always follow the instrucons provided in
this manual.
• Never use the fan in condions other than those indicated by the data on the
idencaon plate.
• Never deacvate, remove, modify or in any other way render inoperave safety devices,
guards or control devices, either of individual components or of the fan itself.
• Never place hands, arms or any other part of the body near any moving part even by
forcing the opening of apertures.
• Never extend parts of the body beyond protecon structures. It is forbidden to use aids
that may increase normal accessibility.
• Never use the fan in atmospheres or environments with the risk of explosions, with the
excepon of fans that are in conformity with the ATEX /EC Direcve.
• Unauthorized operators must not aempt to recfy any malfuncon of the fan and/or
modify the funconal characteriscs or and installaon type.
• Ensure that uids are not introduced into fans.
• Aer any unprogrammed maintenance operaon that required the removal of shields,
barriers or any other protecve device, ensure that all these components have been
reed and are fully funconal before restarng the fan.
• All guards and safety devices must be maintained in condions of perfect and constant
eciency. Warning signs, safety symbols and danger warnings must be also maintained
in perfect eciency and in their correct posion.
• When troubleshoong any faults or malfuncons with fans, take all the precauons
described in this manual, intended to prevent all and any kind of injury to persons or
damage to things.
• Remember to ghten all bolts, nuts and xing rings on all mechanical components that
are adjusted or serviced, following the indicaons given in Table 6-2: Tightening torques
M for bolts with ISO metric thread.
• Before starng the fan, check that all guards and safety devices are installed and in
perfect operang condion. If they are not, it is absolutely prohibited to start the fan.
The person responsible for plant safety or the department head must be informed
immediately.
• Operators must be provided with Personal Protecon Equipment (PPE) in conformity
with legal requirements, such as for example safety footwear, a protecve helmet (if
suspended loads are to be moved), work gloves, insulated footwear and gloves (in
case of work on electrical components) and all other items of PPE required by specic
safety regulaons. Bulky garments and various accessories (es, wide sleeves, etc) are
prohibited.
• The uid moved by the fan must be adequately checked for the possible presence of
toxic and/or inammable substances, even if their presence is not expected in the use of
the fan.
6 Maintenance
Read this secon carefully before carrying out maintenance operaons on the fan. This will
ensure greater condions of safety for maintenance personnel and greater reliability of the
work done.

Nederman NCF Series Specifications

General

Brand	Nederman
Model	NCF Series
Category	Fan
Language	English