Needit ONE-PRO PARK PRO - Fitting the PARK PRO

65 - EN
IMPORTANT!
Check the me and the correct funconality regularly, especially
when switching between summer and winter me. Needit ApS
and importer will not reimburse any parking charges.
Fing the PARK PRO
1. Find a suitable spot on the inside of the windscreen
where the adhesive pads are in contact with the glass.
When you do so, make sure that all the buons on the
back of the clock are accessible and you can easily change
the baery. We recommend placing the disc in the lower
right corner in the passenger side. The recommended
distance from the lower corner is 2 to 4 cm.