Needit ProTeam PARK MINI 2 - Service, Guarantee, and Care

48
All sengs need to be done as described above.
NB: The LCD display in your PARK MINI 2 will go out shortly aer
you remove the baery, so you should not leave the vehicle
while there is no baery in the clock.
Replacing the baery
1. You will need a new CR 2450 3 Volt baery.
2. Carefully remove the whole baery holder.
3. Remove the old baery.
4. Insert the new baery with the + side upwards.
5. Carefully replace the whole baery holder.
Service and guarantee
You can nd answers to many quesons on your new PARK MINI
2
on our website, www.one-pro. or on your local importer’s
home page. Contact our customer service in case of any que-
ries. The contact details are in the end of this manual.
Needit ApS and importer provide a warranty according to the
terms of the European Sale of Goods Act. If faults or issues
occur during the guarantee period, PARK MINI 2 can be returned
to the dealer from which the parking disc was bought. The
device can then be repaired or replaced. If you have any com-
plaints, please also provide a copy of your receipt as evidence