12
4. The oven is automatically switched on and off at
the preset times (e.g.
11:00 and 12:30).
5. When the time has elapsed, a signal is emitted
and the
! symbol flashes. To stop the signal,
press the
> button.
6. Switch the oven off.
7. To end automatic mode, press the > button.
Checking, correcting and
1. To check your settings, press the > button
cancelling settings until the symbol flashes.
2. If required, correct the settings with the rotary
knob.
3. If you want to cancel your settings, turn the set
time back to 0:00 and switch the oven off.
Note The automatic timer is best used with dishes which
require little attention.
The minute timer and OFF time can be pre-
programmed up to a max. 24 hours.
The settings can be displayed at any time by
pressing the
> button.
Special functions
Masking out the display 1. Press the > button for 7 seconds.
The display then goes blank and the time
continues running in the background.
2. To switch on the display, briefly press the
> button.
Setting the time See section ”Before using your appliance for the first
time”.
Dimming the display Between 22.00 and 6.00 the display is automatically
dimmed.
To Next Page
Loading...
