What to do if my NEFF B94M43N3 Oven does not heat up?
If your NEFF Oven isn't heating up, there might be a couple of reasons. First, check the circuit breaker and replace it if necessary. Second, make sure that the function selector is properly set.
Why my NEFF B94M43N3 doesn't work?
If your NEFF oven isn't working, it could be due to a faulty circuit breaker. Check the fuse box to ensure the cooker's circuit breaker is in working order. Another possibility is a power cut; verify if the kitchen light is functioning.
What does it mean if my NEFF B94M43N3 is beeping every second?
If your NEFF oven is beeping every second, the temperature probe may be faulty. Turn the function selector to the Off position.
Why is the clock display flashing on my NEFF B94M43N3?
If the clock display on your NEFF oven is flashing, this usually indicates a power cut. You should reset the clock.
What does it mean if my NEFF B94M43N3 Oven is beeping twice per second?
If your NEFF oven is beeping twice per second, it indicates that the temperature inside the oven is too high. When setting a new heating function, switch off the appliance and contact the after-sales service.
How to remove fruit juice or albumen stains on enamelled surfaces of NEFF Oven?
Fruit juice or albumen stains on enamelled surfaces are a harmless change in the enamel and cannot be removed.
What to do if my NEFF B94M43N3 cannot be switched off?
If your NEFF Oven cannot be switched off, the electronics may be faulty. Switch off the circuit breaker and contact the after-sales service.
General| Type | Oven |
|---|---|
| Oven type / build | Built-in |
| Energy efficiency class | A+ |
| Control type | Touch Control |
| Width | 596 mm |
| Depth | 548 mm |
| Height | 595 mm |
| Weight | 40 kg |
| Number of cavities | 1 |
| Heat source | Electric |
| Timer | Yes |
| Pyrolytic Cleaning | Yes |
| Door Cooling System | Yes |
| Interior Lighting | Yes |
| Installation Depth | 550 mm |
| Voltage | 220-240 V |
| Dimensions (H x W x D) | 595 mm x 595 mm x 548 mm |
| Power Consumption (Pyrolysis) | 4.8 kW |
| Frequency | 50 Hz |
To Next Page
