5
Cooking compartment
Press the ð symbol to open the appliance door.
The cooking compartment has three shelf positions. The shelf
positions are counted from the bottom up.
Use the enclosed cleaning sponge to empty the evaporator
dish after every cooking operation. Otherwise, the dish may
overflow during the next cooking operation.
Caution!
Do not place anything on the cooking compartment floor. Do
not cover it with aluminium foil. A build-up of heat could
damage the appliance.
The cooking compartment floor and the evaporator dish must
always be kept clear. Always place ovenware in a perforated
cooking container or on a wire rack.
Accessories
Use only the accessories supplied with the product or available
from the after-sales service. They are specially designed for
your appliance.
Your appliance is equipped with the following accessories:
You can obtain further accessories from specialist retailers:
Automatic calibration
The boiling temperature of water depends on the air pressure.
During calibration, the appliance is set to the pressure
conditions at the place where the appliance is installed. This
happens automatically when you first use the appliance (see
section: Before first use). More steam develops than usual.
It is very important that the appliance is operated without
interruption for 20 minutes at 100 °C. Do not open the
appliance door during this time.
If the appliance could not be automatically calibrated (for
example, because the appliance door was opened), the
calibration process is started again during the next cooking
operation.
After moving house
So that the appliance automatically adjusts itself to the new
location, you must reset the appliance to the factory settings
(see section: Basic settings) and repeat the initial start-up
process (see section: Before first use).
Before using for the first time
In this section you will find out which steps are required before
using the appliance for the first time:
■ setting the clock
■ changing the water hardness range if required
■ before first use
■ cleaning the accessories before use
Your appliance was thoroughly factory tested for proper
operation. As a result, there may already be a small amount of
condensation in the appliance.
Setting the clock
After making the electrical connection, the KJ and 3
symbols light up.
‹‹:‹‹ appears in the display.
1.Use the clock rotary selector to set the current time.
2.Press the KJ clock function button.
The current time is applied.
Setting the water hardness
Descale your appliance regularly. This is the only way to
prevent damage.
Your appliance automatically displays when it needs descaling.
It has been preset to
™… ƒ water hardness (medium). Change
the value if your water is softer or harder.
You can check the water hardness with the test strips supplied
or ask your water supplier.
Cooking container, solid, GN
^,
40 mm deep
for catching dripping liquid when
steaming and for cooking rice,
pulses and cereals.
Cooking container, perforated,
GN
^, 40 mm deep
for the steaming of whole fish or
large quantities of vegetables, for
juicing berries, etc.
To Next Page
Loading...
