62
Cleaning the burner caps and burners
Proceed as follows:
1. Clean burner cap (A) and burner (B) using water
and detergent.
2. Dry the parts thoroughly.
3. Place the respective burner (B) on the hob (C).
4. Lay the burner cap (A) accurately on
the burner (B).
Fitting the pan supports
Place the pan supports lengthways over the hob on
the step at the edge of the hob.
So that the pan supports do not slip, place the three
pan supports next to each other.
Always make sure that the pan supports are seated
correctly.
Cleaning the accessories
Clean the accessories thoroughly using hot soapy
water and a cloth before you use them.
A
B
C
To Next Page
Loading...
