Childproof lock en
13
▶
Reset the end time to the current time plus the set
cooking time using the button.
a After a few seconds, the appliance applies the
change and starts heating up. The cooking time
counts down.
8.5 Setting the time on the clock
Once the appliance has been connected to the mains
or following a power failure, the time flashes on the dis-
play. The time starts at "12:00". Set the current time.
Requirement:The function selector must be set to the
"Off" position .
1.
Use the or button to set the time.
2.
Press the button.
a The time that is set appears on the display.
Tip:You can go to the basic settings →Page14 to
specify whether or not the time should be shown on
the display.
Changing the time on the clock
You can change the time on the clock at any time.
Requirement:The function selector must be set to the
"Off" position .
1.
Press the button repeatedly until is highlighted
in the display.
2.
Use the or button to change the time.
a The appliance applies the change after a few
seconds.
9 Childproof lock
You can secure your appliance to prevent children
from accidentally switching it on or changing the set-
tings.
Note:You can go to the basic settings →Page14 to
specify whether you want the option to set the child-
proof lock.
You can only use the childproof lock to lock the control
elements of the appliance. In addition, you can lock the
appliance door.
→"Basic settings", Page14
9.1 Automatic childproof lock
When the appliance is switched off, it locks automatic-
ally. You need to pause the automatic childproof lock
before you switch on the appliance.
You can activate and deactivate the automatic child-
proof lock in the basic settings.
→"Basic settings", Page14
Pausing the automatic childproof lock
Requirement:The automatic childproof lock is activ-
ated in the basic settings.
→"Basic settings", Page14
▶
Press and hold the button until goes out on
the display.
9.2 Childproof lock
If you activate the childproof lock, the appliance is
locked until you deactivate the childproof lock. If you
switch off the appliance after the next operation, the
childproof lock is not activated automatically.
Activating the childproof lock
▶
Press and hold the button until appears on the
display.
Deactivating the childproof lock
▶
Press and hold the button until goes out on
the display.
10 Rapid heating
To save time, rapid heating can shorten the preheating
time for the main oven for set temperatures over
100°C.
Rapid heating is possible for the following types of
heating:
¡ CircoTherm hot air
¡ Bread baking setting
¡ Top/bottom heating
10.1 Setting rapid heating for the main oven
To ensure an even cooking result, do not place the
food in the cooking compartment until rapid heating
has come to an end.
Note:Do not set a cooking time until rapid heating has
come to an end.
1.
Set a suitable type of heating and a temperature of
at least 100°C.
Rapid heating automatically switches off at temper-
atures of 200°C and above.
2.
If rapid heating does not switch off automatically,
press the button.
a appears in the display and the arrows are filled
from the bottom to the top.
a Rapid heating starts after a few seconds.
a Once rapid heating has ended, a signal tone
sounds and the symbol goes out on the display.
3.
Place the food in the cooking compartment.
Cancelling rapid heating
▶
Press the button.
a The symbol disappears from the display.
To Next Page
Loading...
Need help?
General