en Appliance door
26
8.
Secure the left- and right-hand spacers with one
screw each.
9.
Slide the inner pane in. In doing so, ensure that the
inner pane is in the retainer .
10.
Push the inner pane upwards until it is in the left-
and right-hand retainers .
11.
Place the rail in the centre of the inner pane.
12.
Attach the door cover and use a screw to secure
it on the left- and right-hand sides .
13.
Note:Ensure that the appliance door slides onto the
hinges without any resistance. If you feel any resist-
ance, check whether you are sliding it in at the cor-
rect opening.
Slide the appliance door straight onto the two
hinges. Slide the appliance door on as far as it will
go.
14.
Open the appliance door fully.
15.
Close the locking levers on the left- and right-hand
hinges.
a The locking levers are closed. The appliance door is
secured and cannot be detached.
16.
Close the appliance door.
Note:Do not use the cooking compartment again until
the door panes have been correctly fitted.
To Next Page
Loading...
Need help?
General